Epoxy & Resin Flooring in Birmingham
Epoxy and resin flooring across Birmingham and the surrounding areas — garage floor coatings, commercial fit-outs and industrial epoxy or PU systems, specified after a proper look at the slab.
Local knowledge, local install team.
We install epoxy and resin flooring across Birmingham and the surrounding areas, covering B postcodes from the city centre out through Edgbaston, Selly Oak, Erdington and Sutton Coldfield. Work ranges from single domestic garages to commercial units and industrial floors, and the specification is decided on site rather than from a price list.
System choice follows the environment. Flake systems suit garages, workshops and gyms because the vinyl chip finish hides wear and gives useful grip underfoot. Metallic and decorative resin belongs in showrooms, bars and living spaces where the floor is meant to be looked at. Self-smoothing epoxy handles warehouse and storage traffic well, while polyurethane screeds are often selected where there is temperature variation, standing water or wash-down — kitchens, food production and heavy engineering, subject to the manufacturer's system guidance.
Substrate preparation decides how long any of it lasts. Every floor is diamond ground or shot blasted to remove laitance and old coatings and to open the concrete so the primer can key. Moisture is assessed before anything is poured, because a slab without a working damp-proof membrane needs a moisture-tolerant primer or it will eventually push the coating off. Cracks, joints and pitting are cut out and filled rather than coated over. Older Birmingham industrial slabs in particular are worth testing properly before a system is fixed.
For the full build-up of each option, see our flake flooring systems, metallic decorative resin, polyurethane systems and warehouse and industrial flooring pages. If the slab is the unknown quantity, our concrete preparation and diamond grinding page covers how we test and prepare it.
How a Birmingham project runs
- 1Enquiry — tell us the area, the use of the space and anything you already know about the floor.
- 2Assessment or site survey — we look at the substrate, existing coatings and the conditions the floor has to work in.
- 3Substrate and moisture checks — testing for damp, laitance, cracking and contamination before anything is specified.
- 4System recommendation and quotation — the proposed build-up, finish and grip level set out in writing.
- 5Preparation — diamond grinding or shot blasting, crack and joint repair, priming.
- 6Installation — the resin system applied in the specified coats and thickness.
- 7Curing and handover — the floor is left to cure before use, with aftercare guidance on cleaning and maintenance.
Specialist resin systems, local install team.
- Garage floor coatings and flake systems
- Commercial and retail resin fit-outs
- Industrial epoxy and heavy-duty PU screeds
- Coverage across Birmingham and surrounding areas
Garage floor coatings in Birmingham
Garage conversions are a steady part of the Birmingham book. Most domestic garages take a flake or solid-colour epoxy build-up: grind the slab, fill the cracks and pitting, prime, then build the coating and seal it. The result is a sealed, dust-free surface that wipes clean and takes tyre traffic without lifting.
Where a garage doubles as a workshop, gym or car store, we usually step the specification up — a tougher top coat, added grip in the wet zone by the door, or a coved edge where the floor is washed down.
Our garage resin flooring systems page sets out the build-up, preparation and finish options in full, and homeowners in Birmingham can request a quotation for a residential garage or an appropriate commercial resin flooring project through the same enquiry.
- Seals concrete so it stops dusting
- Resists oil, fuel and brake fluid
- Flake or solid colour finish options
- Anti-slip grade adjustable to how the space is used
Local sectors we serve in Birmingham
Services available in Birmingham
Nearby areas we cover from Birmingham
Birmingham resin flooring FAQs
Which parts of Birmingham do you cover?
Birmingham and the surrounding areas, across B postcodes including the city centre, Edgbaston, Harborne, Selly Oak, Moseley, Erdington and Sutton Coldfield, plus the wider West Midlands.
Can you coat a domestic garage floor?
Yes. Domestic garages are one of the most common enquiries we get. The slab is ground back, cracks and pitting are repaired, then a primer and either a flake or solid-colour resin build-up is applied and sealed.
Do you install commercial and warehouse flooring in Birmingham?
Yes — commercial units, retail and hospitality spaces, workshops, storage and warehouse floors. Larger areas can be phased so parts of the building stay in use, subject to survey.
How does a quotation work?
Send through the area, what the space is used for and any known issues with the floor. Where a project needs it we arrange a site visit to check the substrate and moisture before quoting. Quotations are free and set out the system being proposed.
Do you need to grind the existing concrete first?
In almost every case, yes. Diamond grinding or shot blasting removes laitance, old paint and sealers and opens the surface so the primer can bond. Coating an unprepared slab is the most common reason resin floors fail early.
How do I choose between epoxy, PU, flake and metallic?
It comes down to use. Epoxy for hardness and chemical resistance in commercial and warehouse settings, PU where there is heat or regular wash-down, flake where you want grip and a hard-wearing patterned finish, and metallic where appearance is the priority. We recommend a system after seeing the space rather than the other way round.
Can you work in city-centre units with limited access?
Yes. Upper-floor units and basement spaces with lift-only access are workable — materials are decanted and dust extraction is set up to protect neighbouring tenants.
Also covering nearby
18 sectors. One specialist team.
Warehouse, factory, food, healthcare, retail, showroom and more — engineered resin systems delivered around your shutdown windows.
Free quotations across Birmingham
Call for a free quote, or send your project details by email and we aim to respond within one working day.