Built for the way you actually use the space.
Resin floors last longer when they're looked after. Our maintenance service covers rotary deep cleans, top-coat re-seals in traffic lanes, line-marking refresh and slip-rating re-tests — planned annually or on a bespoke schedule around your operation.
Maintenance, deep cleaning and re-sealing of resin and epoxy floors.
Resin floors last longer when they are looked after properly, and looking after them means more than a mop and warm water. Our maintenance service covers rotary deep cleans, top-coat re-seals in traffic lanes, line-marking refresh and slip-rating re-tests, planned annually or on a bespoke schedule around your operation.
A top-coat re-seal is a fraction of the cost of a replacement floor. Planned maintenance is the cheapest thing you can do to protect a resin investment. We maintain floors we installed and floors we didn't.
Key benefits
- Rotary deep cleans with neutral-pH detergents
- Top-coat re-seals in worn traffic lanes
- Line-marking and demarcation refresh
- Slip-rating re-tests where required
- Planned annual or bi-annual programmes
- Written condition report each visit
Our installation process
Every resin floor maintenance project follows the same disciplined sequence. Skipping steps is where floors fail — we don't skip.
- Step 01
Condition survey
First visit is a survey — we walk the floor, log wear zones, take slip readings where relevant and put together a maintenance plan.
- Step 02
Rotary deep clean
Rotary scrubber with a coarse pad and neutral-pH detergent lifts embedded grime. Vacuum recovery leaves the floor dry within an hour.
- Step 03
Top-coat re-seal
In worn traffic lanes we apply a fresh 300–500 micron aliphatic PU seal coat. Resets the sacrificial wear layer without touching the base build.
- Step 04
Line marking refresh
Faded aisle marking, hatching and hazard lines are re-cut and re-coated in matching resin — not repainted.
- Step 05
Slip re-test
Pendulum test on wet and greasy zones, written report for your safety file.
- Step 06
Condition report
Each visit ends with a written condition report and forward plan — what needs doing next year, what can wait.
Where it works, where it doesn't
We're honest about specification. A system installed in the wrong environment will fail no matter how well it's laid.
Suitable for
- Industrial and warehouse floors
- Commercial and retail units
- Kitchens and food production
- Showrooms and dealerships
- Any resin floor over 3 years old
Not suitable for
- Floors that have already failed — see Resin Floor Repairs
- Floors past their design life — replacement is more cost-effective
Advantages and trade-offs
Advantages
- Extends serviceable floor life for a fraction of replacement cost
- Restores slip rating and marking in one visit
- Written condition report for facilities records
- Fits around your operation
- Available as a one-off or annual contract
Trade-offs
- •Requires area to be offline for the visit — usually 1 day
- •Top-coat re-seal has 24-hour cure before heavy traffic
Durability and lifespan
A well-maintained resin floor stays serviceable far longer than a neglected one, which dulls, marks and wears prematurely. We don't quote fixed service-life figures because so much depends on the system, substrate, environment, loading, use and cleaning.
The single biggest factor in preserving a resin surface is regular grit removal. Grit under a wheel is what abrades a top coat — the wheel itself is inert.
Curing times
Cure and return-to-service times vary by system and site conditions. Colder conditions extend them; warmer conditions shorten them.
| Stage | Time | Notes |
|---|---|---|
| Deep clean dry-off | 1 hour | Vacuum recovery leaves the floor walkable within an hour. |
| Top-coat re-seal walkable | Varies by system and site conditions | Foot traffic in clean shoes once the seal has gelled. |
| Top-coat re-seal full traffic | Varies by system and site conditions | MHE and heavy loading back on the floor. |
| Line marking cure | Varies by system and site conditions | Fresh marking ready for wheeled traffic. |
Maintenance and aftercare
Between our visits, keep the daily and weekly routine going — sweep or dust-mop daily, rotary scrub weekly with a neutral-pH detergent.
Log any spills of aggressive chemicals or heavy impact damage between visits so we can address it on the next scheduled visit.
Aftercare checklist
- Daily sweep or dust-mop
- Weekly rotary scrub, neutral-pH detergent
- Walk-off matting at all entrances
- Log spills and damage between visits
- Book maintenance visit annually or bi-annually
Colour, finish and customisation
Maintenance schedules are built around your operation — sites with heavy MHE traffic need more frequent re-seals in aisles; retail and offices are usually annual.
One-off deep cleans and re-seals are available if a full contract isn't a fit.
Available finishes
- ◆Rotary deep clean
- ◆300–500 micron PU re-seal
- ◆Line marking refresh in resin
- ◆Slip pendulum re-test
- ◆Written condition report
Tell us the floor age, area and use — we'll come back with a maintenance schedule and quote.
Resin Floor Maintenance — frequently asked
How often should a resin floor be maintained?+
Industrial and warehouse annually. Retail, office and showroom bi-annually. Kitchens and wet processing quarterly for slip test, annually for full re-seal.
Can you maintain a floor you didn't install?+
Yes. We maintain floors installed by any contractor, provided the underlying system is still sound.
How much does maintenance cost?+
Typically 5 to 10% of the original installation cost per year for a planned programme. Far cheaper than replacement.
How long is the site offline for a visit?+
Most visits are a single day. Larger sites are phased across a weekend.
Do you provide slip test data?+
Yes. Pendulum test on wet and greasy zones with a written report supplied for your safety file.
Related resin systems
Resin Floor Repairs
Repairs to damaged, delaminated or worn resin floors.
ReadIndustrial Flooring
Heavy-duty resin systems built for industrial use.
ReadWarehouse Flooring
Hard-wearing warehouse systems built for scale.
ReadAnti-Slip Resin Flooring
Slip-resistant resin systems tailored to the environment.
ReadAvailable across the West Midlands
We install resin floor maintenance across:
Call 07756 971 165 for a free quotation, or email admin@epoxyguys.co.uk.
More resin systems by Epoxy Guys
18 sectors. One specialist team.
Warehouse, factory, food, healthcare, retail, showroom and more — engineered resin systems delivered around your shutdown windows.
Ready to start your project?
Call for a free quote, or send your project details by email and we aim to respond within one working day.